welcome anyị

Ebe ọ bụ na 2000, Shenzhen HZD Technology Co., Ltd. anọwo na-enye nkenke CNC machining ọrụ gụnyere mmepụta, nnyocha na mmepe ahịa n'ụwa nile. Anyị nwere a aha maka àgwà, na oge nnyefe, emebe, edozi nsogbu nkà ma na-enyere anyị ahịa na ndị kasị sie ike na oru ngo. Anyị na-enye CNC machined mmiri na prototype na Transportation, akpaaka, Alternative Engergy, Aerospace, Medical na Ike Nzipu Industries. Kwa afọ mmepụta nke anyị ngwaahịa bụ ihe karịrị nde 20 US dollar, karịa 80% e nyere na nnukwu ụlọ ọrụ si n'ụwa nile.

 

na-ekpo ọkụ ngwaahịa

Communication usu ụlọ

1. Ihe nhọrọ: Al6063, 6065, 7075, etc .;
2. Mkpa ọgwụgwọ: ọxịdashọn, sandblasting;
3. Dị RoHS gburugburu ebe obibi-echebe chọrọ;

UTA
IHE +

Communication n'ihu panel

1. Ihe nhọrọ: Al6063, 6065, 7075, etc .;
2. Mkpa ọgwụgwọ: ọxịdashọn, sandblasting;
3. Dị RoHS gburugburu ebe obibi-echebe chọrọ;

UTA
IHE +

Laser osise igwe laser isi ụlọ

Laser osise igwe laser isi ụlọ

1. Ihe nhọrọ: Al6063, 6065, 7075, etc .;
2. Mkpa ọgwụgwọ: ọxịdashọn, sandblasting;
3. Dị RoHS gburugburu ebe obibi-echebe chọrọ;

UTA
IHE +
  • Metal stamping parts

    Metal stamping parts The hardness test of Rockwell hardness tester. Small, stamped parts with complex shapes can use a small test plane and cannot be tested on an ordinary desktop Rockwell hardness tester.  The materials processed by stamping parts are mainly hot-rolled or cold-rolled metal strip...

  • What are the structure and characteristics of CNC machining?

    In our daily lives, CNC machining technology may not be particularly common, but CNC machining technology has been widely used. This is not a problem. And do you have a detailed understanding of some structures and characteristics of CNC machining technology? Here, the editor of Zhihang will summ...